51.362/1
AVM 105S, 115S: Actuator with SAUTER Universal Technology (SUT)
How energy efficiency is improved
Automatic adaptation to valve, precision control and high energy efficiency with minimal operating
noise.
Areas of application
Actuation of through and three-way valves of the VUN/BUN, VUD/BUD and VUE/BUE series (DN15 to
DN50). For controllers with continuous output (0…10 V) or switching output (2-point or 3-point control).
Features
Pushing force 250 N (AVM 105S) or 500 N (AVM 115S)
Stepping motor with SUT (SAUTER Universal Technology) electronic control unit and
electronic load-dependent cut-off
Automatic detection of control signal applied (continuous or switching)
The type of characteristic curve (linear, quadratic or equal percentage) can be set in the actuator
Independent adaptation to valve stroke
Direction of travel can be set on cable
Y07552
M
Coding switch for selection of characteristic and running time (35, 60 or 120 s)
Maintenance-free transmission with magnetic clutch
Transmission can be disengaged for positioning the valve manually (Allen key included)
Assembly with valve is done automatically after control voltage is applied
Technical description
24 V~ or 24 V~/= power supply
Two-part housing made of fire-retardant plastic; lower section black, upper section yellow
Console made of glass-fibre-reinforced plastic
Brass box nut for fitting valve
Connecting cable 1.2 m long, 5 × 0.75 mm²
Installation position: vertical to horizontal, but not upside down
100 %
0 V Output signal y 10 V
B07650
0 %
Di
rect
ion
of op
era
tio
n
2
Di
re
cti
on
of
o
pe
rat
io
n 1
Type Running
time
[s]
Stroke
2)
[mm]
Pushing force
[N]
Power Weight
[kg]
For valves with equal-percentage characteristic, can be switched over to linear
AVM 105S F132
35/60/120 8.0
250 24
V~/=
0.7
AVM 115S F132
60/120 8.0 500 24
V~/=
0.7
Positioner
1)
Control signal
0...10 V, Ri > 100 k
Starting point U
0
0 or 10 V
Positional feedback signal
0...10 V, load > 10 k
Control
span
U 10
V
Switching range X
sh
200
mV
Power supply
24 V
± 20%, 50/60 Hz
Degree of protection
IP 54 as per EN 60529
24V=
+20% / –10%
(horizontal)
Power consumption
Protection class
III as per IEC 60730
AVM 105S F132
4.8 W
8.5 VA
Response time
1)
200
ms
AVM 115S F132
4.9 W
8.7 VA
Max. media temperature
100 °C
Dimension drawing
Ambient temperature
–10...55 °C
Ambient humidity
5…95% rh
Fitting instructions 1 . 5S MV 506065
without condensation
Material declaration
MD 51.362
For control valve type KTM512 / TA-Regulator DN 15…50
Type Running
time
[s]
Stroke
[mm[
Pushing force
[N]
Power Weight
[kg]
AVM 115S F901
80/160 10.0 500 24
V~ 0.7
Deviation from standard type: inverse scale therefore inverse direction of operation. Adaptor for
control valve available on the valve or from TA-Regulator, stating reference no. 52 757 003.
1)
Also for 2-point or 3-point, depending on type of connection
2)
Maximum stroke of drive = 10.0 mm
Sauter
Components
7151362003 05
