4
TVO-BA-e-1814
4 Operation
Examine before operation!
A. The retainer has to be locked, the power has to be switched on by the power
switch. The power lamp will be flashing.
B. The test stand has to be examined if there is any abnormal sound with the test
stand moving without load.
Manual (automatic) test
A. The manual/automatic switch to manual operation position has to be turned
on.
B. The up/ down button on the stand has to be pressed, then the stand will begin
to work.
C. The button has to be loosened, then the test stand will stop working.
Adjustment of test speed
The test speed is adjustable in the course of testing or before the test.
The speed controller has to be turned to the required speed.
5 Maintenance
A. The environment has to be kept clean; liquid and metal scraps have to be
prevented from entering the engine box; otherwise there is the risk of electric shocks
or moving components may be damaged.
B. The column and motion pedestal has to be kept clean of lubricants.
C. Some lubricant has to be added to the drive stroke and gear after some times of
usage.
D. The test stand has to be kept away from dust and moisture in case if it isn’t used.
6 Packing List
-Test stand, main body
- M6 inner-hexagon Spanner
- 230 V power wire
- M6 clamp
- Instruction Manual
Annotation:
To have a look at the CE Declaration of Conformity, please click onto the following
link:
https://www.kern-sohn.com/shop/de/DOWNLOADS/
Summary of Contents for TVO 500N300
Page 5: ...TVO BA e 1814 5 ...
