background image

CLI-10K4IN-00  |  009-1798-00  |  190613 

Copyright 2019 Savant Systems, LLC

45 Perseverance Way, Hyannis, MA 02601 

Savant.com

  |  508.683.2500

1     of     2

Top Panel

A

Blinking Green

RS-485 communications is not established. 

Once powered is applied, it can take up to 

20 seconds to establish communications.  

 

HELPFUL!

 If communications was 

established and subsequently lost, 

the LED will stay solid for about 1 

minute before it starts blinking.

.5s

1s

1s

Repeat

.5s

Solid Green

RS-485 communication is established and 

module is communicating with thermostat.

B

Thermistor inputs 1-4

 - Connect one thermistor per port (1-

4). When wiring the thermistors, polarity is not observed.

C

24V AC input

 - Connect 24V AC from HVAC transformer or 

similar to power the module. Input power is an AC signal so 

polarity is not observed.

A

RS-485 port - 

As shown in the image above, the right three 

pins connect to the RS-485 connections in the thermostat. 

No connections are made to the leftmost 3 pins. Refer to the 

RS-485 Connections

 section for more information on wiring.

(1)  HVAC 10K Sensor Module - (CLI-10K4IN)
(2)  3 Position Screw Down Plug-In Terminal Block (028-0736)
(1)  6 Position Screw Down Plug-In Terminal Block (028-0737)
(1)  6 Position Screw Down Plug-In Terminal Block (028-9352)
(1)  Product and Regulatory Insert (009-1703)

Remote Temperature Sensor - Flush Mount (SST-TEMP1)
Outdoor Remote Temperature Sensor (SST-0TEMP1)
PLENOM Remote Sensor - Commercial (CLI-PLEN1C)
PLENOM Remote Sensor - Residential (CLI-PLEN1R)
SLAB Remote Sensor (CLI-SLAB1)

Box Contents

Supported Sensors 

(available on the Savant Store)

Specifications

Environmental

Temperature

32° to 104° F (0° to 40° C)

Humidity

10% to 90% Rel Humidity (non-condensing)

Power

Input Power

24V AC (19.2 - 28.8V AC)

Max Current Draw

.1 amps (rms)

Minimum Supported Release

Climate Config App

Version 1.1.2

Regulatory

Safety and 
Emissions

FCC Part 15

Contains FCC ID:

2AEHU-MESHTEK-H52

Contains IC:

20059-MESHTEK52

RoHS

Compliant

Dimensions and Weights

Height

Width

Depth

Weight

CLI-10K4IN

3.77 inch 

(9.58 cm)

3.16 inch 

(8.03 cm)

.91 inch 

(2.3114 cm)

< 1 lbs 

(< .5 kg)

Shipping

6.25 inch 

(15.88 cm)

4.8 inch 

(12.19 cm)

1.25 inch 

(3.175 cm)

< 1 lbs 

(< .5 kg)

10K

Status

24VAC

4

3

2

1

CLI-10K4IN-00

S/N:

UID:

SHK180200331

001AAE09C62D2453

A

B

C

~

~

Left Side Panel

A

Gnd

N/C

N/C

N/C

B

A

Maximum Wiring Distances

RS-485

Up to 1000 feet (304.8 meters) cumulative.

Power

#24 AWG - 20 feet (6.10 meters)
#20 AWG - 57 feet (17.37 meters)
#18 AWG - 90 feet (27.43 meters)
#16 AWG - 143 feet (43.59 meters)
#14 AWG - 228 feet (69.49 meters)

Sensor Module with Four 10K Thermistor Inputs

Quick Reference Guide

Reviews: