CLI-PTAC1K1-00 | 009-1806-00 | 190613
Copyright 2019 Savant Systems, LLC
45 Perseverance Way, Hyannis, MA 02601
| 508.683.2500
1 of 2
Top Panel
Left Side Panel
A
Blinking Green
RS-485 Communications is not estab-
lished. Once power is applied, it can take
up to 20 seconds to establish communi-
cations.
HELPFUL!
If communications was es-
tablished and subsequently lost,
the LED will stay solid for about 1
minute before it starts blinking.
.5s
1s
1s
Repeat
.5s
Solid Green
RS-485 communication is established.
Module is communicating with thermo-
stat.
B
Climate Relays
- The relay outputs on this module operate
similar to the relays of the same name on the thermostat.
Connect the relay outputs (W1, W2, Y1, etc) to the appropri-
ate connection on the PTAC equipment. Refer to the
diagram section when making the connections.
Climate Relay LEDs
- The LEDs associated with each relay
will light when the relay is energized and be off when relay is
in its idle state.
C
10K
- Input port for a 10K
Ω
type temperature sensor. Any of
the sensors listed in the
section are sup-
ported on this input.
D
C / R Inputs
- Connect 24V AC between the R and C termi-
nals. The voltage connected between these two terminals
will power the climate module and supply voltage to all relay
section below for more
information.
A
RS-485 Port
- As shown in the image above, the right three
pins connect to the RS-485 terminals on the thermostat. Re-
fer to the
section for more information
on wiring.
(1) HVAC PTAC Relay Module - (CLI-PTAC1K1)
(2) 3 Position Screw Down Plug-In Terminal Block - (028-0736)
(1) 6 Position Screw Down Plug-In Terminal Block - (028-0737)
(1) 6 Position Screw Down Plug-In Terminal Block - (028-9352)
(1) Product and Regulatory Insert (009-1706)
Box Contents
Specifications
Environmental
Temperature
32° to 104° F (0° to 40° C)
Humidity
10% to 90% Relative Humidity (non-condensing)
Power
Input Power
24V AC (19.2 - 28.8V AC)
Max Current Draw
0.2 amps (rms)
Maximum Wiring Distances
RS-485
Up to 1000 feet (304.8 meters) cumulative
Power
#24 AWG - 20 feet (6.10 meters)
#20 AWG - 57 feet (17.37 meters)
#18 AWG - 90 feet (27.43 meters)
#16 AWG - 143 feet (43.59 meters)
#14 AWG - 228 feet (69.49 meters)
Minimum Supported Release
Climate Config App
Version 1.1.2
Regulatory
Safety and
Emissions
FCC Part 15
Contains FCC ID:
2AEHU-MESHTEK-H52
Contains IC:
20059-MESHTEK52
RoHS
Compliant
Dimensions and Weights
Height
Width
Depth
Weight
CLI-PTAC1K1
3.77 inch
(9.58 cm)
3.16 inch
(8.03 cm)
.91 inch
(2.31 cm)
< 1 lbs
(< .5 kg)
Shipping
6.25 inch
(15.88 cm)
4.8 inch
(12.19 cm)
1.25 inch
(3.18 cm)
< 1 lbs
(< .5 kg)
A
B
PTAC
Status
W1
W2
Y1
CLI-PTACC1K1-00
S/N:
UID:
SHP180601332
001AAE09CA340065
Y2
G
O
C
R
10K
+
D
C
A
Gnd
N/C
N/C
N/C
B (TX-)
A (TX+)
Remote Temperature Sensor - Flush Mount (SST-TEMP1)
Outdoor Remote Temperature Sensor (SST-0TEMP1)
PLENOM Remote Sensor - Commercial (CLI-PLEN1C)
PLENOM Remote Sensor - Residential (CLI-PLEN1R)
SLAB Remote Sensor (CLI-SLAB1)
Supported Sensors
(available on the Savant Store)
Relay Module for PTAC with One 6-Port Climate Relay and One 10K Thermistor Input
Quick Reference Guide
