Savant 4K HDR HDBaseT Matrix Switcher Deployment Guide
Copyright © 2020 Savant Systems, LLC
009-1893-01 | 200102
6 of 27
3.5. IR Wiring
IR control is pass-though only. The IR signal must originate from an external controller, (i.e. SmartControl 12). 3rd party controllers can use used in a
non-Savant deployment.
IMPORTANT!
When using IR pass-through on the HDBaseT Matrix, the IR connections to the chassis and from the receive boxes do not appear
in Blueprint. The connection is made directly from the controller to the device being controlled.
IR Connector Cable
Connect to 3.5 mm IR In on the HDBaseT Matrix to receive the IR
control signal from a controller.
3
2
1
Pin 1
IR - (Black)
Pin 2
IR + (Red)
Pin 3
Not Used
IR Emitter
Connect to an 3.5 mm IR Out on a compatible HDBaseT Receiver to
control a IR device.
IR Wiring Diagram
HDMI OUT
IR OUT
IR IN
Savant Controller
SLN-88VLC4K
HRX-4KVLC100
