Savant 4K HDR HDBaseT Matrix Switcher Deployment Guide
Copyright © 2020 Savant Systems, LLC
009-1893-01 | 200102
21 of 27
7. Firmware Update
Firmware updates for the SLN Matrix are done within its Web UI. The firmware package is downloaded as a single package. Follow the steps outlined in the
subsections below to download the package, then install the applicable updates to the Web UI and MCU.
IMPORTANT INFO!
–
Order of install is very important. The firmware packages are dependent on each other, the Web UI’s firmware update must be done before the
MCU, and then the HDBaseT firmwares.
–
DO NOT reboot/power cycle the matrix while a firmware is being installed.
–
This entire process can take two hours or more to complete.
–
Savant recommends to have the Savant Deployment Environment (SDE) using a wired network connection. Using a wireless connection will
make the process take longer.
7.1. Download Package
The firmware package is downloaded from the product page on the Savant Store.
From a open web browser following these steps:
1.
Navigate to the
2. Search for the SLN Matrix.
3. Scroll down to the Product Documentation section.
4. Click on the Firmware Package to download it.
This will download a ZIP file containing all the required firmware files.
5. Uncompress the zip file.
TIP
: Savant recommends unzipping the file to the desktop for convenience.