Savant Pro Host Deployment Guide
Copyright © 2020 Savant Systems, LLC
009-1776-01 | 200217
6 of 11
4. Wiring and Connections
4.1. Ethernet
The Pro Host communicates with the devices on the network via the wired Ethernet connection. See
Appendix A: Network Requirements
for more
information on configuring Pro Host network settings.
IMPORTANT!
Use of the Host Wi-Fi connection may result in control or connectivity issues.
4.2. Audio Output
Audio outputs on the host are used for the Audio Interrupt Service (AIS) that will interrupt the currently playing audio when a doorbell is pressed.
For more information see the
Audio Interrupt Service (AIS) Configuration for Doorbell Application Note
on the
Savant Customer Community
.
4.3. AC Power
SURGE PROTECTION!
Use a surge-protected circuit for all components and power supplies requiring 100-240V AC 50/60 Hz source power.
ELECTRICAL DISCONNECT!
The source power outlet and power supply input power sockets should be easily accessible to disconnect power in the event of an electrical
hazard or malfunction.
Power Management Recommendations
Savant recommends a pure sine wave uninterruptible power supply (UPS) with the ability to shut down the Savant Host before the battery runs out
of power. Never remove power from the Savant Host before shutting it down. See
Appendix B: UPS Recommendations
for more information.
