Savant Pro Remote User Guide
4 of 23
Copyright 2018 Savant Systems., LLC
009-1410-04 | 180228
REM-2000
Power Button
Press/Release
–
Powers on the Remote. Remote will take 5-7
seconds before Savant logo appears.
–
With Remote powered on, the power button
will toggle the last used A/V Service on or off.
Press/Hold (5 sec.)
– Powers remote Off.
Microphone
Used for voice commands and is positioned behind
small hole on top of remote.
IMPORTANT
: Do not insert objects into the
microphone opening.
Touchscreen
Display
High resolution LCD display with multiple screens
for viewing and control of your Savant System.
–
Motion Activated
–
One touch and swipe operation
–
Controls for Services
Volume
Increase or decrease volume of the Service shown
on the touchscreen display.
Channel
Channel up or down the service selected on the
touchscreen display (if applicable).
Navigation
(D-pad)
–
Standard up, down, left, and right arrows used
for on-screen control.
–
Press and hold the up/down arrows to page up
or down the on-screen menus.
–
Press Select button to select the highlighted
item.
Voice Command
Activate services, scenes, environmental controls,
and various other functions using voice commands.
See the
Voice Commands
Remote Base
Charging Station
Charges the battery
when the Remote is
set into the Remote
Base.
Service Control
Generic Service buttons for basic control over
Audio/Video services.
Function is dependent on Active Service.
NOTE
: Some buttons may do nothing for the active
service.
Wi-Fi
Communicates with the Savant Pro system over the
local Wi-Fi network.
