Savant Lamp Control Deployment Guide
Copyright © 2016 Savant Systems, LLC
009-1388-01 | 160810
2
of
38
Important Safety Information
Before installing, configuring, and operating Savant® equipment and other vendor equipment, Savant recommends
that each dealer, installer, etc. access and read all the required technical documentation. Savant technical
documentation can be located by visiting the
Savant Community
. Vendor documentation is supplied with the
equipment.
Read and understand all safety instructions, cautions, and warnings in this document and the labels on the equipment.
Safety Classifications in this Document
Note:
Provides special information for installing, configuring, and operating the equipment.
IMPORTANT!
Provides information critical to installing, configuring, and operating the equipment.
CAUTION!
Provides special information on avoiding situations that may cause damage to equipment.
WARNING!
Provides special information on avoiding situations that may cause physical danger to the
installer, end user, etc.
Electric Shock Prevention
ELECTRIC SHOCK!
The source power poses an electric shock hazard that has the potential to cause serious injury to
installers and end users.
ELECTRICAL DISCONNECT:
The source power outlet and power supply input power sockets should be easily
accessible to disconnect power in the event of an electrical hazard or malfunction.
Weight Injury Prevention
WEIGHT INJURY!
Installing some of the Savant equipment requires two installers to ensure safe handling during
installation. Failure to use two installers may result in injury.
Safety Statements
Follow all of the safety instructions listed below and apply where applicable. Additional safety information will
be included where applicable.
1.
Read these instructions.
2.
Keep these instructions
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with a dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
9.
Plug into a surge protected outlet or receptacle.
10.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
11.
To completely disconnect this equipment from the AC mains, unplug from the outlet or receptacle.
