Savant Lamp Control Deployment Guide
Copyright © 2016 Savant Systems, LLC
009-1388-01 | 160810
23
of
38
8.
RacePoint Blueprint® Configuration - Bind through Lighting Manager
Add, Configure, and Bind the Lamp Control using the RacePoint Blueprint application is described in this section.
8.1
Enable Controller Functionality on the Host
By default, the Lighting Controller Source function is NOT enabled in the Savant Pro System Host. To
enable, do the following:
1.
Open the Smart or Pro Host Inspector (Double-click the Host in RacePoint Blueprint).
2.
Select Resources from the
Show:
drop-down menu.
3.
Enter a check into the
Lighting Controller Source
field (Default Mode is unchecked).
4.
Close the Inspector
8.2
Configure Blueprint to Access Lighting/Keypad Manager
The color of the State icon in the RacePoint Blueprint toolbar indicates if the Lighting/Keypad Manager
can be accessed.
Orange or Red
- The Lighting/Keypad Manager is grayed out and not active.
Green or Blue
– The Lighting Manager is active and can be opened.
No Lighting Services have been generated and the Lighting/Keypad Manager is grayed
out and not accessible. Select
Generate Services
from the toolbar to generate the
lighting services and the Lighting/Keypad Manager will become active.
TIP!
If this is a lighting only configuration, the following steps will make the
Lighting/Keypad Manager active.
5.
Drag the Smart or Pro Host into the Layout window.
6.
Locate the
Generic NetworkSwitch
in the Component Library. Drag it into the
Layout window.
7.
Connect the
Ethernet(Ethernet)
port on the Smart or Pro Host to the
Generic
NetworkSwitch
. The State icon will change from red to orange and the Generate
Services icon will become active.
8.
Select
Generate Services
icon.
The State icon changes from orange to either blue or green and the Lighting/Keypad
Manager will become active.
Services are generated and the Lighting/Keypad Manager is active and accessible
