Savant Lamp Control Deployment Guide
Copyright © 2016 Savant Systems, LLC
009-1388-01 | 160810
22
of
38
7.10
Export Configuration File
After binding the Lamp Control to the configuration running on the Savant Pro System Host, Savant
recommends that the configuration file with all the bindings be exported, saved, and then reloaded onto
the Host. The configuration file currently loaded on the Host does NOT include the bindings. To get a
configuration file that includes the bindings, the configuration with its bindings needs to be exported
from the Host.
1.
On the SDE/MacBook, open the System Monitor application.
2.
Within System Monitor, select and highlight the Host from the list of hosts displayed.
3.
Once highlighted, select
Get Config
from the System Monitor toolbar.
4.
A drop-down dialog window will open. Browse to and save the configuration to a pre-determined
directory.
The file will get saved as a
<config_file>.tgz
file
Important!
If there are any updates made to the bindings after the file has been exported, either the exported file will
need to be updated or the updated configuration with the updated bindings will need to be exported
again.
