Savant IP Audio Deployment Guide
Copyright © 2017 Savant System, LLC
009-1551-00 | 171121
31 of 34
Appendix C: Retrieving and Setting IP Address
The SDE must be connected to the same network as the Savant system in order to the devices to appear in rpmEmbSnanner.
NOTE
:
The UID is needed to verify that the correct IP Address is being checked. Record the UID from the sticker located on the rear of the unit.
Have Savant Application Manager active.
1.
Active da Vinci 8.2 or higher.
2.
Go to
Launch > rpmEmbScanner
3.
Select the device to edit in the list, and click Edit
4.
Click the Configure drop-down, Select Manually
5.
Enter IP Address
NOTE
:
Subnet Mask and Router will populate automatically.
6.
Click
Save & Reboot
