5.
Slide module out until it is completely removed from chassis.
6.
If the module is being replaced, refer to the
instructions for proper installation procedure.
7.
If the module is not being replaced, install a blank plate using
the two (2) M3 x 6 mm screws removed in step 2. This will
ensure that proper airflow through the chassis is retained as
well as preventing dust and debris from entering the chassis.
VOM-SV02 | 009-0723-02 | 150707
VOM-SV02 | 009-0723-02 | 150707
45 Perseverance Way, Hyannis, MA 02601
Copyright © 2015 Savant Systems, LLC
2 of 2
