062712
7 of 10
Savant TTV-2018 Deployment Guide
009-0575-00
Configure the Touch Driver to use a specific TTV
1. Connect to the TTV-2018 host via
Share
screens.
2. Stop the software on the host.
3. Open the
UPDD Console
.
4. Select
Hardware
and verify that the screen matches the screen shot below
.
Note
: If not, verify cables are connected.
5. Select
Calibrate
.
6. Follow instructions displayed on the TTV.
7. Restart software.
Preventative Maintenance and Cleaning
1. Clean the touch screen daily to avoid a buildup of dirt and dust with the following:
•
A soft, absorbent and non-abrasive cleaning cloth
•
A commercially available, non-ammonia glass cleaner (50% isopropyl and 50% water)
2. Gently wipe the screen.
3. Use a clean, soft cloth to dry the screen.
Additional Documentation
To see more documentation go to
http://www.SavantSystems.com
and navigate as follows:
>
Dealer Login > Knowledge Base
•
Refer to:
Products >
Touch TV 18.5 (TTV-2018)
Quick Reference Guide
•
Click link:
RacePoint Blueprint
™
