062712
9 of 10
Savant TTV-2018 Deployment Guide
009-0575-00
Safety
Read First
About Note, Important, Caution and Warning Classifications
Note and Important: In this document, Note and Important provides special information for installing, configuring and
operating the equipment.
Caution: In this document, Caution describes a situation that may cause damage to the equipment.
Warning: In this document, Warning describes a situation that may present a physical danger to the installer, end-user,
etc.
Electric Shock Prevention
ELECTRIC SHOCK: The 100-240 VAC, 50-60 Hz source power poses an electric shock hazard that has the potential
to cause serious injury to installers and end-users.
ELECTRICAL DISCONNECT: The 100-240 VAC, 50-60 Hz source power outlet and power supply input power sockets
should be easily accessible to disconnect power in the event of an electrical hazard or malfunction.
ELECTRICAL DISCONNECT: The 24 VDC power outlets should be easily accessible to disconnect power in the event
of an electrical malfunction.
Weight Injury Prevention
WEIGHT INJURY: Installing some of the Savant Controllers require two installers to ensure safe handling during
installation. Failure to use two installers may result in injury.
Before installing, configuring and operating SAVANT
®
equipment and other vendor equipment,
SAVANT
®
recommends that each dealer, installer, etc. access and read all the required technical
documentation. The SAVANT
®
technical documentation is located on the SAVANT
®
Dealer Portal.
Vendor documentation is supplied with the equipment.
Read and understand all safety instructions, cautions and warnings in this document and the
labels on the equipment.
