Wireless Keypad Auxiliary Control | 009-1759-05
3 of 3
45 Perseverance Way, Hyannis MA 02601
Copyright © 2020 Savant Systems, Inc. | 201006
| 508.683.2500
Connecting the Auxiliary Control keypad as a companion to a Savant wireless keypad switch or dimmer is shown in the diagrams below.
Both a standard wiring scenario and a no neutral type setup are presented. Ensure that all unused wires have the stripped portion cut
off and are capped with a supplied wire nut or an approved alternative.
From
Power
Aux Control 1
Dimmer or Switch
Aux Control 2
Two Auxiliary Control Keypads wired to a Wireless Dimmer or Switch
Dimmer
Aux Control
Black
Tape
From
Power
One Auxiliary Control Keypad wired to a Wireless Dimmer (No Neutral)
–
No Neutral Configuration
- Only incandescent type loads supported.
Wiring Diagrams
