Savaria 001103, Owner'S Manual

10

M2LIFT Owner’s Manual

Part No. 001103, 28-m08-2018

Gate Locks

The WR-500 gate lock keeps the gate locked when the platform is moving and 
not at a landing.

Keys are for emergency use only and should always be kept in a safe 
place for use by trained personnel only. After use of any emergency 
function (access key or manual lowering device), ensure that all 
doors/gates are secure and locked. While the emergency function is in 
use, DO not leave the area unattended.

Emergency Gate Opening

The gate can be opened manually using the 
emergency key provided for the WR-500 lock (Figure 5).

Insert the key into the lock and turn it a half turn 
clockwise to unlock the gate. Pull the gate open and 
then turn the key a half turn counter-clockwise to 
remove it from the lock. 

DO NOT

 open the gate if there 

is any chance of falling from the platform. 

Safety Brake

The motor

 Safety Brake

 stops the platform in the 

event of a chain failure.

During normal operation, the chain tension keeps the 
brake mechanism up so the brake cam does not 
interfere with the tower guide rail. If a chain failure 
occurs, the brake mechanism activates and stops the 
platform.

Emergency Stop Button

Pressing the red 

Emergency Stop

 button during travel will stop the lift 

immediately and activate the alarm. The Emergency Stop overrides the landing 
(call/send) stations. Be sure to pull the Emergency Stop button out to return the 
lift to normal operation.

Battery Lowering

In the event of a power failure, press the DOWN button to bring the lift to the 
lower level.

NOTE

+EY0.
 

Figure 5