background image

2

M2LIFT Owner’s Manual

Part No. 001103, 28-m08-2018

IMPORTANT

Ensure that only an authorized Savaria Dealer installs and services the M2LIFT. 
Under no circumstances is anyone other than a dealer with Savaria training and 
authorization to install, adjust, service or modify any mechanical or electrical 
device on this equipment. Failure to follow this warning can result in safety 
system compromises or defeat; this can result in serious injury or death. Savaria 
accepts no liability for property damage, warranty claims or personal injury, 
including death, in this circumstance.

Passenger safety is the result of countless details in the equipment’s design, 
manufacture, and installation. After installation, reliable operation and 
continual safe operation requires regular service and inspection at least twice 
per year, or more frequently where usage, environment, or local jurisdiction 
requires. As the Owner, you are responsible for ensuring that regular service 
and inspections occur in a timely manner.

Refer to this manual for specifications, operating instructions and maintenance 
of the M2LIFT.

Upon completion of installation, the dealer must provide you with the 
following information and ensure it is recorded in this manual. In addition, 
either the dealer or you must keep any service and/or maintenance records in 
the Maintenance Record section of this manual.

WARRANTY

Ensure your Savaria Dealer provides you with a copy of the manufacturer’s 
limited parts warranty and documentation relating to any Dealer labour 
warranty.

-------------------------------------------------------------------------------------------------

FOR OWNER’S RECORDS

Customer Name: _________________________________________

Installing Dealer: _________________________________________

Dealer’s Telephone Number: _______________________________

Date Installed: ___________________________________________

Serial/Job Number: _______________________________________

Summary of Contents for 001103

















Reviews: