6
M2LIFT Owner’s Manual
Part No. 001103, 28-m08-2018
2. GENERAL SPECIFICATIONS
Load capacity
750 lb (340 kg)
Maximum travel
M2LIFT-40: 42” (1067 mm)
M2LIFT-60: 62” (1575 mm)
M2LIFT-75: 77” (1956 mm)
Levels serviced
2
Travel speed
9 ft/min (0.046 m/s)
Daily cycle
Normal: 10
Heavy: 25
Excessive: 40
Maximum starts in 1 hour on standard installation: 5
Platform size
37 1/8” x 54 1/8” (9443 mm x 1375 mm)
Side wall height
42” (1067 mm)
Access
Front/rear access (type 2 cab)
Power supply
120 VAC, 15A, 60 Hz, single phase
Drive system
Direct drive gear
Chain suspension
Motor
24 VDC, 1.3 HP, geared
Controller
LUT125 PCB
Finish
Electrostatic powder coat paint on all metallic surfaces and
vacuumed formed plastics
Standard features
24VDC operation
Wireless call/send stations at landings
Constant-pressure type buttons
Operating control buttons on platform
Automatic battery recharging system (115 VAC)
Low-voltage controls
Limit switches
Non-skid platform surface
Automatic access ramp
Emergency stop button (E-stop on COP) and alarm
Pit switch (E-stop on tower)
Safety underpan
Motor safety brake
Battery lowering
Outdoor package
Summary of Contents for 001103
Page 15: ......
