11
Part No. 000846, 29-m08-2018
Eclipse Gearless Owner’s Manual
Operating from the Cab Operating Panel (COP) Controls
1
If equipped with a key switch, insert the key into the key switch on the Cab
Operating Panel and turn the key to the ON position.
2
Press the selected Landing button once and release. The elevator will
automatically travel to and stop at the selected landing.
3
Turn the key (if equipped) to the OFF position and remove the key.
4
Unlock the wheelchair wheels (if applicable) and exit the cab.
If the cab is equipped with a gate, the gate must be closed after
exiting the cab. If the gate is left open, all controls will remain
inoperable.
The outside landing door must be closed after exiting or entering
the cab. If the outside landing door is left open, all controls will
remain inoperable.
5. EMERGENCY LIGHTING
In the event of a main power failure, the emergency cab lights will turn on
automatically. The cab lights will stay on for approximately 15 seconds. When
the lights go off, press any landing button to turn them on again. If you press
the landing button of the level you are at, the lights will turn on and the
elevator will not move.
NOTE
Summary of Contents for Eclipse Gearless
Page 15: ......