9
Part No. 001132, 18-m09-2019
Orion MRL Owner’s Manual
3. OPERATING FROM THE LANDING CONTROLS
When using the landing controls, the cab can only be moved
(called) to the level from which you are calling. When using the
COP buttons in the cab, the cab can be moved to any level.
To call the elevator to the appropriate level:
1
Press the
CALL
button. The cab will automatically stop at your landing.
2
When the elevator reaches the landing, the sliding doors will open
automatically. Enter the cab. The doors will close behind you after a few
seconds. Once inside the cab, lock the wheelchair wheels.
Wheelchair wheels must be locked at all times when the
elevator is moving.
4. OPERATING FROM THE COP CONTROLS
1
If sitting in the cab in a wheelchair, lock the wheelchair wheels. If standing
in the cab, hold on to the handrail.
2
Press the appropriate landing button to “send” the cab to the desired
landing.
3
When the elevator reaches the landing, the door will “chime” and the sliding
doors will open automatically. Exit the cab. The doors will close behind you
after a few seconds.
Wheelchair wheels must be locked at all times when the
elevator is moving.
NOTE
WARNING
WARNING
