19
81375-A-OM-EN
Vuelift Mini Owner’s Manual
Cleanliness
•
Clean all debris from the car top.
Top Car Guide
•
Examine car rail to hoistway rail conditions at the car top. Note any
abnormal wear patterns or changes in alignment.
Guide Rails
•
Examine the car rails for loose fastenings and fit at all joints.
Traveling Cables
•
Examine the traveling cables for wear, chafing, kinking and alignment.
Examine the attachment points for secure fastening and looseness.
Door Hangers, Locks, etc.
•
Verify the interlock is functioning properly.
•
With the door open, attempt to move the car using the hall call and
COP buttons.
•
Observe the door closing for any roughness in bearings, inconsistent
operation, or misalignment.
Hoistway Cleaning
•
Clean dirt and trash from all horizontal surfaces including the car and
entrance sills.
Other
•
Observe any hoistway problems that should be addressed such as:
•
Unauthorized equipment installed in the hoistway
•
Damage to the hoistway enclosure which would affect its fire
resistance rating
•
Evidence of intentional acts
•
Any evidence of unauthorized people entering the hoistway
Examine the Ropes
•
Examine the car ropes for equal tension, and visually inspect for any
frays or deformation of the ropes which would negatively impact their
strength.
Leaving the Car Top
•
Clean up and dispose of debris properly. Return the car to normal
operation and the stop switch to the RUN position.
PIT OR RAMP AREA
Stop Switch
•
Examine the operation and condition of the stop switch. Repair as
needed.
Cleaning
•
Clean the pit. Examine the bottom level landing sill and clean as
needed.
