Getting Started
Power Switch
Power switch is located on the
underside of the scanner.
On the underside of the scanner you will find a small recessed
button.
Use a pen or paper clip to push the button until you hear a
notification sound.
Ensure power switch remains depressed after you release it.
Power on Saveo Scan
Switch on and Charge your Scanner
Please switch on your scanner (as illustrated) and place it in the
cradle to charge for 3~4 hours before first use.
If you want to charge smartphone and scanner simultaneously,
please switch scanner to “Charge Mode” before placing it in the
cradle.
*Please remove the protective sticker from window
before use
Trigger/Power
On button
Wrist Strap
Universal Holder
Exit Window
Operating Elements
LED indicator
Charging Cradle
Switch for Operation Mode
and Charge Mode/Bluetooth
Mode
Micro USB Cable
Use Micro USB cable to connect
to smartphone/tablet
SAVEO-SCAN-RCCD-H
Extend retractable
arm
Press button and slide
outwards to extend the
arm
Attaching your smartphone to scanner using the
universal holder
Extend the retractable arm before placing phone in holder and
then pushing it firmly back against the phone.
Secure phone in
holder
Insert phone
Attach your smartphone
1
2
3
Connect phone to scanner with Micro USB
As USB connection locations vary on different models of
smartphone, the cable can be configured for your specific
model. For iOS devices, please attach the appropriate
adapter to connect to your device.
