background image

C H A P T E R

 2 

Savi Fixed Reader SR-650-101 Installation

14

RF interference from other equipment such as computers, walkie-talkies, 
cellular phones, elevators, electrical motors, or other RF-emitting 
devices

Savi Fixed Reader SR-650-101 mounting height of less than 15–30 feet 
(4.572–9.144 meters)

Metal or RF-absorbent surface on the tracked item

Tag location relative to the Savi Reader, such as behind a metal 
obstruction (as illustrated in Figure 2-1) or stacked under multiple layers

Some of these factors may be beyond your control. The goal when 
positioning the Savi Fixed Reader SR-650-101 is to optimize advantages 
and reduce limitations to make the collection range as efficient as possible.

Figure 2-1  Impediment limiting the Savi Fixed Reader SR-650-101 collection range

If the location forces you to use a less-than-ideal position for the reader, the 
collection range could be reduced, requiring additional readers.

Note: 

If you must mount a Savi Fixed Reader on a wall, the collection 

range may not extend to the opposite side of the wall. You may need a 
second Savi Reader to monitor the area behind the wall.

Area of 

limited 

collection 

ability

Metal wall

Savi Fixed Reader 

mounted near a 

ceiling

Summary of Contents for SR-650-101









































Reviews: