Setting Up the Savi Fixed Reader SR-650-101
Savi Fixed Reader SR-650 Installation Guide
29
Figure 2-15 Telnet UDAP value display
To assign a new local IP address to the reader and modify gateway and
netmask addresses:
1.
At the cursor, type
localip=10.7.20.118
(or whatever valid IP address
you want to assign) and press
Enter
to set the reader IP address to the
input one.
Figure 2-16 Telnet local IP address display
2.
Type
reset
and press
Enter
to cause the IP address to take effect.
Now you can use Telnet to connect to the reader at the new IP address.
3.
Type
gateway=10.100.4.1
(or whatever valid IP address you want to
assign) and press
Enter
to set the reader gateway IP address to the input
one.
