background image

Options

Features

Settings

Default

Media player

When a call begins

Mute/pause/do nothing

Pause

When a call ends

Unmute/play/do
nothing

Play

General

Ring both headset and
PC

Selected/not selected

Not selected

Maintain headset to PC
link

Selected/not selected

Not selected

Help us improve this
software by allowing us
to collect anonymous
feature usage statistics

Selected/not selected

Selected

Microsoft OC/Lync

dial tone enabled

Selected/not selected

Not selected

Audio sensing enabled

Selected/not selected

Not selected

Action to media player
When a softphone call comes in and audio is playing, this feature controls the behaviour of
iTunes, Winamp and Windows Media Player.

Launch audio devices control panel
Provides a shortcut to the Windows sounds and audio devices control panel.

Ring both headset and PC
This feature gives you the option to have the PC ringtone played on both the headset as well as
the PC speaker.

When this feature is selected, the PC ringtone will be heard on both the PC speaker as well as
the headset.

When this feature is not selected, the PC ringtone will only be heard on either the headset or
the PC speaker based on how the PC audio has been set up.

Maintain headset to PC link
This feature forces the radio link to the PC to stay active even after the call has ended. This can
eliminate the need to re-establish the radio link when switching between PC audio
applications.

Help us improve this software by allowing us to collect anonymous feature usage statistics
When selected, this will allow Plantronics to collect data on feature usage patterns. This
information will only be used by Plantronics to improve the quality of our future software and
hardware products.

Microsoft Office Communicator/Lync

 dial tone enabled

If this feature is selected, when a PC radio link is established, Microsoft Office Communicator/
Lync

 will assume the user is trying to place a VoIP call and provide a dial tone.

33

Summary of Contents for W745A







































Reviews: