Making Printer Settings Using the Control Panel
143
❒
When the printer switches to the Energy Saver mode, the Power indica-
tor goes off, while the Online indicator stays lit and
[
Energy Save Mode
]
appears.
❖
Auto Reset Time
You can set On or Off and the time for the Auto Reset Timer.
❒
Appears only at network standard model.
❖
Auto Reset
• On
• Off
❒
Default: On
❖
Set Time
• 10 to 999sec by 1sec.
❒
Default: 60 sec
❖
Memory Usage
You can select memory to be used from “Font Priority” or “Frame Priority” ac-
cording to the paper size, resolution or printer language.
• Font Priority
This setting uses memory for registering fonts.
• Frame Priority
This seting uses memory for high speed printing.
❒
Default: Frame Priority
❖
Unit of Measure
You can specify the unit of measurement in “mm” or “inch” for the custom pa-
per size.
• mm
• inch
❒
Default value is destination dependant.
❖
Edge Smoothing
You can set whether edge smoothing is enabled. When it is on, jagged lines
appear more smoothly. Set it to off when the print image contains fine grada-
tion in tone.
