Install Waterfall Weir
10
Attach discharge plumbing kit to pump
5
S T E P 5 – W AT E R FA L L W E L L A N D P U M P
Use keyhole saw or matte knife to remove
2” knockout on one side of Waterfall Well.
Place the Waterfall Well on a flat surface. The two
open sides should face each other with the locking
tabs aligned. Press locking tab and insert into slot.
Continue to assemble the locking tabs from the
bottom of the Waterfall to the top ensuring each
tab is locked securely into place.
1
2
Place Waterfall Well into the basin
with the lid on.
3
4
Attach elbow adapter to pump outlet.
Screw the adapter into the pump in a
clockwise direction.
Waterfall Well