8
Figure 16
11. INSTALLING THE
SWITCH HOUSING
NOTE:
Before starting installation, disconnect
the power by turning off the circuit breaker or
removing the fuse at fuse box.
Step 1. Remove the 3 screws from the
mounting plate.
Step 2. While holding the switch housing
under your fan, snap together the wire
connection plug. (Fig. 16)
Step 3. Install the switch housing onto the
mountimg plate with 3 screws provided. Be
sure to tighten all screws. (Fig. 16)
Mounting plate
Connection plugs
Switch housing
Screws
