10
Figure 22
Figure 21
Figure 23
14. OPERATING YOUR FAN
NOTE:
Wait for fan to stop before
changing the setting of the slide switch.
Turn on the power and check the
operation of your fan. The pull chain
controls the fan speed as follows: 1 pull-
High, 2 pulls-Medium, 3 pulls- Low, and 4
pulls-Off.
Light pull chain it controls the light in "ON"
or "OFF".
Speed settings for warm or cool weather
depend on factors such as the room size,
ceiling height, number of fans and so on.
The slide switch controls directions:
forward (switch left) or reverse (switch
right)
Warm weather - (Forward) A downward
airflow creates a cooling effect as shown in
Fig. 22. This allows you to set your air
conditioner on a warmer setting without
affecting your comfort.
Cool weather - (Reverse) An upward
airflow moves warm air off the ceiling area
as shown in Fig. 23 on a cooler setting
without affecting your comfort.
13. FAN WITHOUT LIGHT
KIT
(OPTIONAL)
1. Disassemble the switch housing from the
light kit by removing nut and washer on the
center of switch housing, you can keep the
light kit for future use.
2. Attach the plastic plug to the switch
housing.
3. Holding the switch housing under your
fan, snap together the wire connection
plugs.
4. Install the switch housing to the
mounting plate with screws provided. (Fig.
21)
Plastic plug
Switch housing
Mounting plate
Connection plugs
Screws
