9
11. INSTALLING THE
SWITCH HOUSING
NOTE:
Before starting installation,
disconnect the power by turning off the
circuit breaker or removing the fuse at
fuse box. Turning power off using the fan
switch is not sufficient to prevent electric
shock.
Step 1.
Remove the screws from the
mounting plate under the fan motor.
Step 2.
While holding the switch housing
under your fan, snap together the wire
connection plug. (Figure 19)
Step 3.
Raise the switch housing to the
mounting plate until the holes in switch
housing and mounting plate line up.
Reinsert screws to secure in place. (Figure
19)
Figure 19
Mounting plate
Connection plug
Screws
Switch housing
