9
Figure 18
Figure 19
Figure 20
13. OPERATING
INSTRUCTIONS
Restore power to ceiling fan and test for
proper operation.
A.
HI, MED
, and
LOW
buttons:
These three buttons are used to set the
fan speed as follows:
HI
= high speed
Med
= medium speed
Low
= low speed
B. OFF button:
This button turns the fan off.
C. button:
This button controls the light. Press and
release the button to turn the light ON
or OFF. Press and hold the button to
set the desired brightness. The light
key has an auto-resume, it will stay at
the same brightness as the last time it
was turned off.
The Reverse switch is located on the top of
the motor housing. Slide the switch to the
Left for warm weather operation. Slide the
switch to the Right for cool weather
operation.
Speed settings for warm or cool weather
depend on factors such as the room size.
Ceiling height, number of fans and so on.
NOTE:
Wait for fan to stop before
changing the setting of the slide switch.
Warm weather - (Forward) A downward
airflow creates a cooling effect as
shown in Fig. 19. This allows you to set
your air conditioner on a warmer
setting without affecting your comfort.
Cool weather - (Reverse) An upward
airflow moves warm air off the ceiling
area as shown in Fig. 20. This allows you
to set your heating unit on a cooler
setting without affecting your comfort.
LOW
OFF
HI
MED
