Savwinch EFF Installation
Installation Tips
The SAV-EFF-2S is a direct two speed unit. It
releases the anchor as soon as the down rocker
switch has been pressed. There will be no delay
as long as you hold the switch, the anchor will
drop at fast fall speed to the bottom. Rope tangles
can occasionally occur on barrel. Always ensure
correct operation and observe the chain and rope
are falling fast and retrieving at normal speed.
1. Must join at least 1m of cable (See left page
for correct cable size) between motor and EFF.
No Direct connection from the motor wires to EFF.
2. Do not cross wires on the battery side, this will
cause the EFF to malfunction and void warranty.
3. EFF must go down fast. If not, swap the motor
wires around. Using it the wrong way will void warranty.
4. Ensure the Circuit Breaker is wired between the Isolator/Battery and the EFF.
5. Reguarly spray Switchgear, Terminals, Motor/Gearbox with Lanolin.
6. Reguarly check all fittings and Winch for any loose parts.
7. Ensure the Circuit Breaker is wired as close to the battery as possible.
