7
How to set Analyzer Modes
With power on in the absence of an alert, press-and-hold the Control Button
repeatedly to step through the three available Analyzer Modes.
N
In All-Bogeys mode , all bogeys will be reported at the Initial Volume as
soon as they are detected. Use your judgment to decide whether or not
they are threats.
N
In Logic mode , X- and K-band bogeys assessed to be too weak to be
threats will be reported at the Muted Volume. If and when they become
threats, the audio warning will increase to the Initial Volume.
N
In Advanced Logic mode , X- and K-band bogeys the Analyzer
determines are not threatening will not be reported at all. Threats will be
reported at Initial Volume. This mode is particularly useful in metro areas.
One exception: to be failsafe, the Analyzer will always pass extremely
strong alerts along to you for your judgment.
NOTE: In Logic mode
and Advanced Logic mode , you are deferring to
an algorithm that will assess the threat level and report accordingly.
Be assured that the Analyzer has years of radar experience. It always operates
the receiving circuitry at maximum sensitivity, and it knows that instant-on
radar is a greater threat than ordinary radar. Therefore it will always warn of
instant-on immediately at the Initial Volume whenever it is detected.
How to get our free app
Go to your app store and download V1connection, the app.
How to connect V1 Gen2 to your phone
The first time V1connection the app is run, it will automatically connect if it
finds only one V1 Gen2. Subsequently, it will connect to the first V1 Gen2 it
recognizes. If none of them are the last one used, it will automatically con-
nect to the first one found. If it finds more than one, you will be prompted to
select which to use. Select the V1 Gen2 with the highest (least negative) RSSI
value from the list. V1 Gen2’s blue will change to a constant glow when
connected.
NOTE: The V1 Gen2 will not be shown in the list of Bluetooth devices on
your iPhone, iPad or iPod touch.
