•
Temperature setting
Temperature range - Achievable temperature fram - 1 8-1 O°C,
The setting temperature is displayed when the LED starts
blinking. The current temperature at the centre of the fridge will
be displayed once the LED lights up. When the "KNOB" is turned,
the setting temperature will continuously change the range of the
temperature. After pre-setting the temperature, the LED display
will stop blinking (after a few seconds), indicating the temperature
has been set (Iocked).
•
About temperature setting s of dual zone
You can change the freezer temperature by adjusting the control
knob. The desired freezer temperature will be shown on the
control display as you change the setting.
At ambient temperatures of around 30 °C the fridge compartment
has been prepragramed to remain between O°C to 5°C. This
cannot be changed.
*
Refer to appendix for details
SELECTING TEMP ERATURES (OC or °F )
It is possible to select between Centigrade of Fahrenheit with your
ENGEL.
When the "MODE" button is pressed,(the LED display will be
blinking the setting temperature and more when the select button
is pressed during this mode.)
The current temperature unit will be displayed whenever the
"SELECT" button is pressed during this mode.
The temperature unit will be changed (OC or 0F), after pre-setting
the temperature, the LED display will stop blinking (after few
seconds), indicating the temperature has been set (Iocked)
- 10-
Summary of Contents for ENGEL MD45F-CD-P
Page 31: ... MEMO 30 ...