− 9 −
EN
6. Operation
Connect only to the following power sources:
Before starting to use your new refrigerator, its interior as well
as exterior shall be thoroughly cleaned with a wet cloth to avoid
hygienic issue.
NOTICE
This refrigerator can operate on both 12V and 24V DC. Make
sure the battery voltage matches with the voltage stated on the
refrigerator label. If the battery voltage is too high it will damage
the refrigerator.
First, set the temperature setting knob to "0" (OFF). Then, set
it anywhere between 1 and 5, and the LED interior light will go
on. Turn the temperature setting knob to a required setting.
6.1 Connection to 12V or 24V DC battery
6.1.1 Onboard direct wiring
1) Twisting lead wire
To further reduce the radio interference during DC operation,
twist the negative and positive cables (use separate cables)
together into a spiral form, between the battery.
12V or 24V DC battery
• DC 12/24 V input cord
− :
Black Cord
+ :
Red Cord
Summary of Contents for Engel SB Series
