− 12 −
EN
Due to the humidity within the cabinet, frost will form on the
evaporator surface after it has been used for a while.
Frost with as thick as 6mm or more (1/4in) will reduce cooling
efficiency. To avoid this, the evaporator needs to be defrosted
regularly.
To defrost, turn off and unplug the refrigerator to allow for complete
removal of frost from the evaporator.
7.2 Defrosting
7 Maintenance of refrigerator
Always disconnect the refrigerator from the power source
before you clean or service it.
• Clean the interior with a cloth moistened with warm water and
wipe again with a dry cloth.
• Clean the door of the refrigerator with a wet cloth.
• Clean the interior condenser to remove dirt (dust etc.) at
regular intervals.
7.1 Cleaning interior and door
Never use a brush, powder soap, cleanser, acid, benzene,
gasoline, or mineral thinners to clean the refrigerator, as these
tend to leave scratches on the plastic coating and painting.
NOTICE
Summary of Contents for Engel SB Series
