Introduction – Read This First | 3
1.
Toothed rubber belt
2.
Ink tubes
3.
Paper pressing board
4.
Feed belt
Take care not to let paper clips and other foreign objects fall inside the printer.
After the ink cartridges are installed and the printer is turned on for the first time, the
print head priming process will begin. After it is completed, a head cleaning procedure
may be required to achieve a full nozzle check.
During printing, do not turn off the power or unplug the power cord from the wall outlet.
During printing, do not subject the printer to external shock such as that caused by
tapping paper on it.
Sawgrass always recommends keeping the printer powered on. This will allow the
printer to run automatic maintenance utilities for optimal performance.
Up to 10 kg (22.1 lb.) of evenly spread weight can be placed on the printer. Do not
place any concentrated weight of more than 2.5 kg (5.6 lb.) on the printer.
Do not place unsteady objects on the printer. If they fall, they will cause injury to users
and/or damage to the printer.
The operational life also depends on the environment in which the printer is used.
The Waste Collection unit may fill up sooner than normal based on the specifics of your
printing practices and/or maintenance procedures.
"Prepare new Waste Collection Unit" message appears shortly before the waste
collection unit is full. Although the printer remains usable until the unit is completely full,
contact Sawgrass or an authorized distributor to purchase a replacement.
Ink cartridges should be used up before the “Recommended Use By” date label affixed
to each cartridge. Using ink in the printer past this date may be harmful to the unit
and/or result in poor output quality.
Cartridges that the printer report as empty may still contain a small amount of ink. This
is normal as the cartridges are overfilled to prevent them from completely running dry.
This prevents air from being drawn into the printer.
Ink cartridges and supplies comply with the manufacturer's safety specifications. To
ensure safety and reliability, use genuine Sawgrass ink cartridges and supplies.
Printing hundreds of copies in a single day might cause nozzle loss the following day. If
this happens, perform the head cleaning procedure.
To ensure consistent print quality this printer performs regular automatic maintenance
after and/or during printing. Maintenance is also performed when printing begins after a
period of inactivity. A higher than normal amount of ink will be consumed during this
Summary of Contents for SG1000EU
Page 1: ...Table of Contents i ...
