Maintenance | 73
A dialog box for entering the username and password opens.
4. Enter the username and password, then click [OK].
If this is the first time to do this, enter "admin" as the username and leave the
password blank.
To ensure security, it is important you change the password.
5. In the menu area, click [Configuration].
6. Specify the printer settings.
7. Click [OK].
The specified settings are transmitted to the printer.
Changing the Printer Settings
You can specify the following settings on each page of Web Image Monitor.
[Device Settings] area
[System] page
You can specify [Device Name], [Comment], [Location], and [Recycle Paper
Mode].
[Date/Time] page
You can specify [Set Date], [Set Time] and [Time Zone]
[ROM Update] page
You can check the printer’s firmware version. Sawgrass may periodically provide
updates to the printer’s firmware.
[Administrator Tools] area
[Administrator Authentication] page
You can specify [New Password] and [Confirm New Password].
[Restore Factory Defaults] page
You can restore the default settings for the network interface.
[Interface] area
[Interface Settings] page
[Ethernet]
You can specify [Ethernet Speed].
[Wireless LAN Settings] page
You can set the network interface.
•
[Wireless LAN Settings]
[Communication mode], [SSID], [channel], you can set
[the security Method].
•
[WEP Settings]
When the [Security Method] is WEP, you can set
the new WEP key (confirmation).
Summary of Contents for SG1000EU
Page 1: ...Table of Contents i ...
