About The SG500 and SG1000
| 12
Control Panel
1. [Menu] Key
Use this key to display the menu.
2. Display
Displays the current printer status and messages.
3. Cartridge replacement indicator
Each color corresponds to an ink cartridge.
K, C, M, and Y indicate black, cyan, magenta, and yellow, respectively.
The amount of ink remaining in each ink cartridge is indicated on the six-level display.
4. Waste Ink Full Indicator
The amount of waste ink is indicated on the six-level display. A message appears
when it is near time and time to replace the waste collection unit.
5. Scroll Keys
To cycle through the menu or set a value on the display.
6. [OK] Key
To confirm the setting or setting values.
7. [Power] Key
Press this key to turn the power on. To turn the power off, press and hold down this
key for one second.
See the section “Turning On/Off the Power” for more information.
8. [Escape] key
Press this key to return to the previous screen or menu on the display.
9. No-Fuss Head Cleaning
Press and hold for 3 seconds to perform a head clean on all channels.
10. Selection keys
Press to select an item displayed at the bottom of the screen.
Summary of Contents for SG1000EU
Page 1: ...Table of Contents i ...
