SawStop 10” Industrial Cabinet Saw 67
Overall saw dimensions:
44” w x 34” d x 34” h
69 1/4”w x 36 1/2” d x 34” h (w/ optional fence & 36” rails)
85 1/4” w x 36 1/2” d x 34” h (w/ optional fence & 52” rails)
Cabinet footprint:
20” w x 25” d
Cast iron table:
24” w x 30” d, 44” w x 30” d (w/ extension wings)
Extension wing:
10” w x 30” d
Extension table (optional):
24” w x 30” d (36” rails), 40” w x 30” d (52” rails)
Weights (may vary with motor):
530 lbs (table saw only)
635 lbs (w/ optional fence, 36” rails & table)
685 lbs (w/ optional fence, 52” rails & table)
Shipping weight (approx.):
675 lbs (table saw only)
Blade:
60-tooth, professional grade, 5/8” arbor
Blade diameter:
10”
Blade tilt:
Left
Blade kerf:
3 mm
Blade plate thickness:
2 mm
Max. depth of cut, blade at 0º:
3 1/8”
Max. depth of cut, blade at 45º:
2 1/4”
Max. rip, right of blade:
52 1/2” (w/ optional 52” rails)
36 1/2” (w/ optional 36” rails)
Max. rip, left of blade:
12 1/2”
Dado diameter:
8” (requires a separate brake cartridge)
Dado max. width:
13/16”
Arbor diameter at blade:
5/8”
Main bearing size:
62 mm OD x 30 mm ID
Second bearing size:
52 mm OD x 25 mm ID
Table in front of blade (max. elevation):
11”
Table behind blade (max. elevation):
9 3/4”
Arbor Runout:
0.001” Maximum Allowable Runout
Blade Lateral Movement Over Full Elevation Range:
0.006” Maximum
Table Flatness Measured Diagonally:
0.010” Maximum Gap
Overall Table and Extension Wing Flatness:
0.025” Maximum Gap
Blade Alignment with Miter Slot:
0.010” Maximum displacement
Deviation of Miter Gauge Indexing Stops
from actual angle:
±0.25º
Alignment between Spreader and Blade:
0.010” Maximum difference
Miter slots:
T-shaped, 3/4” at top, 1” at bottom, 3/8” deep
Dust collection port diameter:
4”
Riving knife / spreader thickness:
2 mm
Blade guard:
polycarbonate, extends only 5/8” to right of blade
Standard Insert:
zero clearance, phenolic core, melamine surfaces
Dado Insert:
zero-clearance, phenolic core, melamine surfaces
Belts:
2 V-ribbed belts— arbor belt is static dissipative
Hand Wheels:
8” diameter, cast iron with chrome handle
Motor Options:
3 hp, 1 phase, 230V, 13A, 60 Hz, TEFC
5 hp, 3 phase, 600V, (Canada)
5 hp, 1 phase, 230V, 20.5A, 60 Hz, TEFC
7.5 hp, 3 phase, 600V (Canada)
5 hp, 3 phase, 230V, 13A, 60 Hz, TEFC
3 hp, 1 phase, 240V, 50 Hz (Australia)
5 hp, 3 phase, 480V, 7A, 60 Hz, TEFC
5 hp, 3 phase, 415V, 50 Hz (Australia)
7.5 hp, 3 phase, 230V, 19A, 60 Hz, TEFC
7.5 hp, 3 phase, 480V, 9A, 60 Hz, TEFC
3 hp, 3 phase, 230V, 8A, 60 Hz, TEFC (discontinued)
Cabinet Saw Specifications
Cabinet Saw Manual 1st Reprint.i67 67
3/9/2010 8:33:10 AM
