Extension Table, 36 Inch Fence System (cont.):
Insert an M8 x 40 countersunk socket head bolt (17) through the
one remaining
front
rail hole and into the corresponding hole in the front edge of the extension table (Fig. 17). Place
an M8 washer (14), an M8 lock washer (15) and an M8 hex nut (16) and hand-tighten.
Insert an M8 x 40 countersunk socket head bolt (17) through the
rear
rail and into the corresponding hole in the rear
edge of the extension table. Place an M8 washer (14), an M8 lock washer (15) and an M8 hex nut (16) and hand-
tighten.
Fig. 17
Fig. 18
Page 9
|
SawStop T-Glide Fence System - Industrial Series II
14
14
15
15
16
16
17
17
Extension Table, 52 Inch Fence System (cont.):
Insert M8 x 40 countersunk socket head bolts (17) through the
three remaining
front
rail holes and into the corresponding holes in the front edge of the extension table (Fig. 18).
Place an M8 washer (14), an M8 lock washer (15) and an M8 hex nut (16) on each bolt and hand-tighten.
Insert M8 x 40 countersunk socket head bolts (17) through the three remaining
rear
rail holes and into the
corresponding holes in the front edge of the extension table. Place an M8 washer (14) and an M8 lock nut (16) on
each bolt and hand-tighten.
