22
TSG-FDC OWNER’S MANUAL
There are some operations in which the use of the floating dust collection guard system is not
practical, and in those cases, the floating blade guard can be lifted up towards the dust tubes and
the floating guard lock handle can be tightened to secure it in place.
When pivoting the dust tubes relative to the dust collection guard mounting bracket and when
adjusting the lateral position of the floating blade guard, the floating blade guard should always be
locked in its upper, or retracted, position.
i
Adjusting the Floating Blade Guard Spring
1
The spring tension knob can be
used to adjust the tension of the
floating guard spring, which controls
the extent to which the floating
blade guard is biased towards its
upper, retracted position. Rotate
the knob clockwise to increase the
tension or counter-clockwise to
decrease the tension.
