Sawyer Manufacturing Company
7799 S. Regency Dr., Tulsa, OK 74131 USA
F
918.834.0318
info@sawyermfg.com
P
918.834.2550
sawyermfg.com
V1.2
Tools Needed For Assembly
*
9/16” Nut Drive
5/16” Allen Wrench
Large Crescent Wrench
Fig. 1
Fig. 4
Installation
1.
Install die
(E, Fig. 2)
and plunger
(D, Fig. 3)
set for
appropriate coupon size thickness and specification
(ASME, API, AWS).
Note: Use 5/16” Allen head wrench.
Tip: Depress unit for easier access.
2.
Install hose fitting
(C)
from ENERPAC pump
(B)
to
bend test machine.
(Fig. 4)
Note: Check for leaks.
Tip: Thread hose ends with Teflon tape to avoid leaks.
Caution: Use a flat surface with ample space.
Tip: Unit can be mounted vertically or horizontally.
Tip: Unscrew plastic caps before installing hoses.
Note: Loosen oil fitting for proper pump ventilation.
C
B
*Not Included
Fig. 3
D
E
Fig. 2
