Sawyer Manufacturing Company
7799 S. Regency Dr., Tulsa, OK 74131 USA
F
918.834.0318
info@sawyermfg.com
P
918.834.2550
sawyermfg.com
V1.2
Installation
1.
Install die
(E, Fig.1)
and plunger
(D, Fig.1)
set for appropriate
coupon size thickness and specification. (ASME, API, AWS)
Note: Use 5/16” Allen head wrench.
2.
Install jaws
(I, Fig. 2)
to tensile tester according to coupon
thickness and specification.
(ASME, API, AWS)
3.
Install hydraulic hose fitting
(C, Fig. 3)
to tensile
testing machine.
Tip: Unit can be mounted vertically or horizontally.
Tip: Unscrew plastic caps before installing hoses.
Note: Loosen oil fitting for proper pump ventilation.
Tip: Thread hose ends with Teflon tape to avoid leaks.
Installation
Tools Needed For Assembly
*
9/16” Nut Drive
5/16” Allen Wrench
Pliers
Large Crescent Wrench
Sledge Hammer
E
D
C
Fig. 1
Fig. 2
Fig. 3
*Not Included
I
