Sawyer Manufacturing Company
7799 S. Regency Dr., Tulsa, OK 74131 USA
F
918.834.0318
info@sawyermfg.com
P
918.834.2550
sawyermfg.com
V1.2
1
. Take off wheel wing-nut
(K)
to move wheel up or down wheel
adjustment holes
(H)
depending on pipe size.
(Fig. 13)
2
. Turn tape lap angle wing nut
(J)
depending on the amount of
overlap wanted.
(Fig. 14)
Note: The higher the left wing the bigger the spiral lap; The more parallel the
wings are the more of a straight wrap
.
3
. Place accuwrap machine on pipe.
(Fig. 15)
4
. Pull a 6”-12” section of tape from under accuwrap and stick to
pipe.
(Fig. 16)
5
. Using 2 people grab handles
(L)
wrap pipe.
(Fig. 17)
Note: For best results, wheels should never leave pipe.
6
. When finished wrapping cut tape and disassemble in opposite
order of installation.
(Fig. 18)
H
K
J
Operation
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
L
