• When changing a bulb, always switch off at the mains
and allow the bulb to cool before handling.
• Used bulbs should not be disposed of with household
waste. Please recycle where facilities exist. Always
use the correct type and wattage bulb. Using the
incorrect wattage bulb will damage the bulb and
ballast.
• Twist 90 degrees and remove from slots to remove.
• Refit by locating the pins in the lampholder slots,
and twisting 90 degrees to engage the pins with the
contacts.
• Replace with:
1612T35A - 2 x 35W T5 Fluorescent
1612T35W - 2 x 35W T5 Fluorescent
Fitting/replacing bulbs
Instruction leaflet
Bosco
1612T35A, 1612T35W
www.saxbylighting.com
For your safety, always switch off the supply before changing lightbulbs, cleaning or removing shades.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling advice.
Recycling advice
Safety information
Saxby Lighting Ltd. BH23 3PE
We recommend cleaning with a soft dry cloth.
Do not use solvents or abrasive cleaners as these could
damage the finish.
35W G5 T5
Iss.1 24062013
