background image

V4 29/11/2020

WWW.saxbylighting.com

Saxby lighting. BH17 7BY

Instruction leaflet

Severus Outdoor Wall

61211, EL-40103

Commissioning

For your safety, always switch off the power supply before changing lightbulbs, or cleaning.
This system contains non-replaceable parts and cannot be serviced. If damage occurs the part should be scrapped.

Waste electrical products should not be disposed of with household waste. Please recycle where facilities 
exist. Check with your Local Authority or retailer for recycling advice.

Recycling advice

Safety information

We recommend cleaning with a soft dry cloth.

Do not use solvents or abrasive cleaners as these could 
damage the finish.

This light source is protected by a shade. This part must be replaced immediately should the shade 
become cracked or damaged. This fitting must not be used without the shade in place.

good quality insulation tape.

making  sure  that  no  cables  are  trapped  or  exposed 
and  secure  with  the  6  screws  removed  previously. 
Push the cover plate – removed previously– onto the 
led housing unit.

light is now ready for use.

Fitting/Replacing bulbs

Replace Cracked Shade

Reviews: