Setting up your microscope
Remove the microscope and accessories from the box and identify all parts before assembling. When
ready to begin, set the microscope on a stable surface. Your objective lenses should be pre-installed.
If your microscope requires manual installation, please take the following steps:
1. Remove the eyepiece from the packaging.
2. Slide the narrow end of the eyepiece into the eyepiece holder.
3. Plug the power cord into a power outlet.
4. Your microscope is powered by 230V AC power. It is important to ensure the voltage coincides with that
of the microscope.
5. If your microscope is battery powered, please insert the required batteries (not supplied) to get started.
Alternatively you can turn it on with just the AC adapter.
Product Disclaimer
This product is designed and intended for use only as a biological microscope. Modifying this product in
any way for use in any situation other than the original and intended product design will automatically
void the warranty.
Operating the microscope
Getting started
1. Switch on the power and the light(s) on your microscope should be illuminated. If your microscope has
a light intensity adjustment dial, ensure it is turned up to the brightest.
2. Place and align the specimen / object to the centre of the working stage and where possible,
hold it down with the stage clips.
saxon
PBM Prodigy Biological Microscope Instruction Manual
