GA02041
5
CR-158 COUPON PRINTER OPERATIONS MANUAL
CONNECTING
THE
PRINTER
The printer has three available connections: 7 pin connector, USB or RJ45 socket.
P
OWER
&
P
ULSE
C
ONNECTION
The 7-pin connector at the centre, rear of the device is for power and for controlling
the device via a pulse interface. From left to right, the pins are:
1 – Red – +12-24V DC
2 – Black – Ground
3 – Brown – Coin In Pulse Signal
4 – Orange – Note In Pulse Signal
5 – Yellow – Pay Out Trigger Pulse Signal
6 – Green – Ticket Out Output
7 – Blue – Error Out Output
USB
D
ATA
C
ONNECTION
The USB connection is used to host a COM port on a connected PC, allowing the device
to be communicated with through the SSP protocol. Information on this protocol can
be found in a separate document (Innovative Technology manual GA138). SSP can be
used to configure and control the device, as well as to download certain files onto the
device via the SSP update process. The device is connected in this way like any other
USB peripheral, and no special cables should be required.
USB
7-Pin
Connector
RJ45
